Open any dossier for a list of inclusions, fitting tolerances, and the average bench-time we set aside.
SBS · PU · Liquid membrane
Slab cleaned, cracks routed and sealed, primer rolled, two-coat SBS-modified bitumen or polyurethane membrane, fibre mesh in the corners and parapet upturns. Ten-year workmanship guarantee.
Thermal imaging · Hose test
Most "roof leaks" are actually a parapet crack, a clogged scupper, or a failed AC drain penetration. We thermal-image the ceiling, hose-test from the roof, find the actual entry point — fix only what is broken.
GI · Aluzinc · Insulated panel
Old corrugated GI swap-out for insulated sandwich panels (rockwool or PUF core). Less noise during rain, 8–12°C cooler attic, slope corrected for proper drainage.
Lead flashing · Cement parapet
Failed parapet cap or rusted flashing is the #1 cause of "the roof is leaking" calls. We rebuild the cap, install proper drip-edge, and seal all penetrations with butyl tape under the membrane.
EPS · XPS · Reflective
50mm EPS or XPS board over the slab, mechanically fixed, then a reflective cool-roof topcoat. Drops top-floor room temperature by 6–9°C in peak summer.
Pre-monsoon · Post-monsoon
Two visits a year. Drains and scuppers cleared, parapet cracks sealed, AC penetration boots checked, photo report emailed. Catches problems before they become lakhs.
A two-hour visit. We map the supply tree, listen to the system, and photograph every union.
You receive a hand-drafted plumb plan and a written, itemised estimate — no allowances, no surprises.
Sleeves are pre-cut at the studio. We arrive on the agreed morning and work clean — drop-cloths, vacuum, and a daily walk-through.
A 90-minute pressure hold and a hand-wiped joint inspection.
Two hours, no obligation. You'll have a written estimate within the week.